Rear Panel Features - NETGEAR STM150 Reference Manual

2. Power on test status
3. USB ports
4. Uplink switched N-way automatic speed negotiating auto MDI/MDIX Ethernet port
5. Downlink Ethernet ports
Four switched N-way automatic speed negotiating auto MDI/MDIX Ethernet ports.

Rear Panel Features

The STM150 rear panel functions are described below:
1
Figure 1-3
1. Console port: To connect to a COM port on a Microsoft Windows or Linux computer; may be
used to perform the initial configuration.
2. Kensington Lock: Attach a kensington lock to prevent unauthorized removal of the unit.
3. Restart: Press to restart the unit; it does not reset the appliance to its factory defaults.
4. Reset: Use a sharp object, press and hold this button for about ten seconds until the front panel
Test light flashes to reset the unit to factory default settings.
Note: If you reset the unit, all configuration settings will be lost, the default password
will be restored, and you will need to re-register the product license.
5. Power socket.
Introduction
ProSecure Web/Email Threat Manager STM150 Reference Manual
2 3
v1.0, January 2009
4
5
1-5