NETGEAR STM150 Reference Manual page 61

If tag spam email is selected,
subject.
Figure 4-6
Note: For the heuristic spam detection to function correctly, the STM150 must be
connected to the Internet.
To configure heuristic scanning.
1. On the main menu, go to Email Security > Anti-Spam > Heuristic Scanning.
2. In the Enable Heuristic Spam Detection section, check the SMTP and POP3 boxes. You can
either Block spam mail or Tag spam email.
3. If you selected Tag spam email, select one of or both of the following options:
• Add tag to mail subject: - If this is selected then you can customize the spam tag that is
appended in the email subject (default is [SPAM]).
• Add tag X-NETGEAR-SPAM to mail header
Optimizing Scans
ProSecure Web/Email Threat Manager STM150 Reference Manual
the
STM150 will append a spam tag (customizable) in the mail
v1.0, January 2009
4-11