NETGEAR STM150 Reference Manual page 74

ProSecure Web/Email Threat Manager STM150 Reference Manual
Note that certain sites contain elements from different HTTPS hosts. For example,
if
https://example.com
• secureserver1.example.com
• secureserver2.example.com
• imageserver.example.com
You must add the above-mentioned sites to the hostlist to completely bypass the scanning of
https://example.com
when the user attempts to access the HTTPS page "My Page".
To add hosts to the Host Access Control List
1. Select the Bypass the following Hosts for HTTPS check box to enable the bypass list.
2. Enter the host name (not the URL) of the server into the Add Host box, and then click Add.
Click Apply.
To delete hosts from the Host Access Control List
1. Select the host you wish to delete from the bypass list.
2. Click Delete.
3. Click Apply.
In addition to manually entering host names and IP addresses one at a time, you may import and
export the list. Note that the files to be imported should be in .txt format, and both of the IP
addresses and host names are required. Use Notepad or a similar text editor to open the exported
file.
4-24
contains HTTPS elements from:
. This is because different files from these three hosts are also downloaded
v1.0, January 2009
Optimizing Scans