Configuring Ftp Scan - NETGEAR STM150 Reference Manual

ProSecure Web/Email Threat Manager STM150 Reference Manual

Configuring FTP Scan

To configure FTP scanning, go to
Web Security > FTP
Figure 4-16
If you enabled FTP scan in Web Security > Policy > FTP you can specify what type of action to
take against detected malware as well as which file types to block on FTP.
Under Action you can specify what type of action to take against detected malware. You can select
Delete file or Log only.
In Scan Exception, set the maximum file size that STM150 will scan. STM150 can scan files up to
25,600KB (25MB) in size.
Note: Setting the maximum file size to a high value may affect STM150's performance.
NETGEAR recommends setting this value to 8,192KB (default).
In Block Files with the Following Extensions, select the Enable check box.
Optimizing Scans 4-25
v1.0, January 2009