Panasonic S-200PE2E5 Technical Data & Service Manual page 79

Accessories Supplied with Unit
(4-Way Cassette)
Part Name Figure
Full-scale
installation
diagram
Washer
Screw
Insulating tape
Flare insulator
Flare insulator
Drain hose
Hose band
Packing
Drain insulator
Clamper
Operating
Instructions
Installation
Instructions
Use M10 for suspension bolts.
●
Field supply for suspension bolts and nuts.
●
AMP Air Conditioning
Type of Copper Tube and Insulation Material
If you wish to purchase these materials separately from a local
source, you will need:
Q'ty Remarks
1.
2.
Printed on
1
container box
3.
For suspension
8
bolts
For full-scale
4
installation diagram
For gas and liquid
2
Check local electrical codes and regulations before
tube flare nuts
obtaining wire. Also, check any specified instructions or
limitations.
1 For liquid tube
Additional Materials Required for Installation
1.
1 For gas tube
2.
3.
4.
1
5.
6.
For securing drain
1
hose
1
1
4 For electrical wiring
1
1
1-73
Deoxidized annealed copper tube for refrigerant tubing.
Foamed polyethylene insulation for copper tubes as
required to precise length of tubing. Wall thickness of the
insulation should be not less than 8 mm.
Use insulated copper wire for field wiring. Wire size varies
with the total length of wiring. Refer to 4. ELECTRICAL
WIRING for details.
CAUTION
Refrigeration (armored) tape
Insulated staples or clamps for connecting wire (See your
local codes.)
Putty
Refrigeration tubing lubricant
Clamps or saddles to secure refrigerant tubing
Scale for weighing
www.ampair.co.uk | sales@ampair.co.uk
1