Panasonic S-200PE2E5 Technical Data & Service Manual page 245

2. Wireless Remote Controller
2. Installing the Receiver
1
Remove the bottom case.
2
Mount to the wall.
Preparation: Make 2 holes for screws using a driver.
(3)
Mount the top case.
 Align the claws of
the top case and
then align the claws
of the bottom case.
Cut here with a
nipper and remove
the burr with
f a . e l i
Claw (2 places)
Wood screw (supplied)
Connect the remote controller wiring.
(2)
 Arrange the wires along the groove of the case.
Bottom case (Back side)
AMP Air Conditioning
Insert the driver
and slightly turn.
Flat-blade
Bottom
screwdriver
case
E x p o s e d y t p e
(1)
Mount the bottom case
to the wall.
W l l a o t x i f h t
receiver
Claw
Hole for screw
Clamper
(supplied)
Pass through
the hole.
Remove the coating. Approx. 6 mm
Top case
Remove the sheath. Approx. 150 mm
(Back side)
Make sure the wiring connection
is in the correct direction.
Attention
Mounting the bottom case
 Tighten the screws securely until the screw
heads touch the bottom case.
(Otherwise, loose screw heads may hit the
PCB and cause malfunction when mounting
the top case.)
 Do not over-tighten the screws.
(The bottom case may be deformed, resulting
in fall of the unit.)
Connecting the remote controller wiring
 Arrange the wires as shown in the illustration for (2) in step 2,
avoiding unnecessary wires being stored in the case. (Caught
wires may destroy the PCB.)
 Avoid wires touching parts on the PCB.
(Caught wires may destroy the PCB.)
Preparation: Make 2 holes for screws using a driver.
(3)
Mount the top case.
 Align the claws of
the top case and
then align the claws
of the bottom case.
Avoid the wire
being caught.
Claw (2 places)
e
Connect the remote controller wiring.
(2)
Bottom case (Back side)
8-17
www.ampair.co.uk | sales@ampair.co.uk
Control of 2WAY SYSTEM
E m b e d d e d y t p e
(1)
Mount the bottom case to
the wall.
 Pass the wire through the hole
in the centre of the bottom case.
Claw
Hole for screw
Wood screw (supplied)
Terminal board
Remove the coating.
Approx. 6 mm
Top case
(Back side)
Make sure the wiring connection
is in the correct direction.
8