Panasonic S-200PE2E5 Technical Data & Service Manual page 199

n 7-segment, 4-digit display for remote controller timer display
The connected unit Nos. are displayed as shown below, using the 7-segment 4-digit (
the colon.
 Display for unit Nos. 1 – 20
Not lit Not lit
1
6
3 8
4
2 7
5
Lit Lit
 Display for unit Nos. 21 – 40
Not lit Not lit
21
26
23 28
24
22 27
25
Lit Lit
 The meaning of the colon display changes in the same way, allowing unit Nos. up to 80 to be displayed.
 Sample displays of the unit Nos. of connected indoor units
• Display of unit No. 1
• Display of unit Nos. 1 and 2
• Display of unit Nos. 1, 2, and 3
• Display of unit Nos. 1, 2, 3, and 4
NOTE
The change of the colon display (between unit Nos. 1-20 to unit Nos. 21-40) occurs automatically
every 10 seconds. (However the display does not change if there are no higher-number units connected.)
To change the display to the higher-number units before 10 seconds have passed, press the
n The total compressor operating time is displayed
(in 1-hour units) using 8 digits.
• When the first 4 digits are displayed, the top
dot of the colon is illuminated. (Figure (A))
• When the last 4 digits are displayed, the colon
dot is OFF. (Figure (B))
• The display of the first 4 digits and last 4 digits
changes automatically after 10 seconds. The display
can also be changed by pressing the
button.
NOTE
With the outdoor unit maintenance remote controller (when connected to the outdoor unit), the unit remote controller
check functions will not operate.
AMP Air Conditioning
Not lit Not lit
11 16
13
9 14
12 17
10 15
Lit Lit
Not lit Not lit
31 36
33
29 34
32 37
30 35
Lit Lit
(Flap)
Meaning of display colon
18
19
20
— —
is not displayed.
Meaning of display colon
38
39
40
— —
(A)
A
10: <Compressor's total operating time>
(A) and (B) are displayed alternately.
(The example here (0000, 0062) indicates 62 hours.)
6-7
www.ampair.co.uk | sales@ampair.co.uk
) display and
— —
— —
(Flap) button.
(B)
A
6