Downloading A Software Upgrade - 3Com OfficeConnect 3C16710 User Manual

16710.bk : MANVT100.FRM Page 21 Tuesday, October 7, 1997 11:38 AM
System Up Time This field indicates how long the
hub has been running since the last reset.
Number of Resets This field shows the total
number of resets since the hub was first installed, or
initialized.
Last Reset Type This field indicates the cause of the
last reset.
Management Module Hardware Revision T his is
the hardware version of the management board
inside the hub.
Flash EPROM Software Revision T his is the version
number of the software image stored in the
management board's memory .
PROM Software Revision This is the version number
of software stored in the Boot PROMs on the
management board.

Downloading a Software Upgrade

Downloading a Software Upgrade
The Software Upgrade screen, as shown in
Figure 5-14 , is used to download a new version of
the software image to the hub. This option is
available only for users with security access level.
Figure 5-14 Software Upgrade Screen
When 3Com issues a new version of the hub
SmartAgent® software, you can obtain the software
image from 3Com bulletin board services, see
"3Com provides easy access to technical support
5-21