3Com SuperStack II 3300 User Manual page 89

Displaying OSPF
Interface Information
To display information about the module's OSPF interface configuration,
enter the following at the top-level menu:
ip ospf interface summary
or
ip ospf interface detail
The following example shows an OSPF detail display:
Table 20 describes the OSPF interface display field attributes:
Table 20 Field Attributes for the OSPF Interface Displays
Field Description
Indx Interface entry index, corresponding to the IP interface index.
Pri OSPF router priority for the interface.
Area ID OSPF area that the interface belongs to.
Xmit Cost Interface transmit cost.
Xmit Delay Interface transmit delay.
Hello Intvl OSPF hello packet transmit interval for the interface.
Rxmit Intvl LSA retransmit interval.
Dead Intvl Time interval before OSPF declares a neighbor dead.
Password Used to secure messages between routers in an area. This allows
you to prevent attacks on your network.
IP Address The IP address of the interface on which the area is defined.
(continued)
Configuring OSPF Interfaces 89