Disconnecting Routed Signal(S) - Crestron DigitalMedia DM-MD6X4 Installation & Operation Manual

DigitalMedia Distribution Center
40 • DigitalMedia Distribution Center: DM-MD6X4/DM-MD6X6
4. As indicated on the LCD screen, press the Select button on the navigation
pad to route the signal.
The selected input is routed to the selected output(s). The LED(s) of the
selected output(s) light steadily.
NOTE: After 30 seconds of inactivity, the DM-MD6X4 or DM-MD6X6 times out.
The input LEDs that were lit become unlit, and the output LEDs that were lit for
routed outputs also become unlit. In addition, the DM-MD6X4 or DM-MD6X6
returns to the home screen while also dimming the LCD.

Disconnecting Routed Signal(s)

One or more routed signals can be disconnected simultaneously.
To disconnect routed signal(s), use the following procedure:
1. Ensure that the home screen is displayed on the front panel LCD screen. If
the home screen is not displayed, press the HOME button.
NOTE: The LEDs of all routed outputs are not lit.
2. Press the OUTPUT button(s) that correspond to the output(s) to be
disconnected.
The LED of the selected output(s) flashes.
3. Press the Select button on the navigation pad.
The selected output(s) are disconnected. The LED(s) of the selected
output(s) light steadily.
Crestron DM-MD6X4/DM-MD6X6
Installation & Operation Guide – DOC. 7196B