Crestron DM-MD6X4/DM-MD6X6
Configuration and Status
Installation & Operation Guide – DOC. 7196B
When the DM-MD6X4 and DM-MD6X6 is in Installer mode, use the front panel to
configure the device and to view status information.
NOTE: Crestron Toolbox can also be used to configure the DM-MD6X4
and DM-MD6X6 and to view status information. For more information, refer to the
embedded Crestron Toolbox help file.
Accessing Installer Mode
When the DM-MD6X4 or DM-MD6X6 is in Installer mode, use the front panel to
configure the device and to view status information.
To access Installer mode, use the following procedure:
1. Ensure that the home screen is displayed on the front panel LCD screen. If
it is not displayed, press the HOME button.
The home screen is shown below.
Home Screen (DM-MD6X6 Shown)
NOTE: After 30 seconds of inactivity, the DM-MD6X4 and DM-MD6X6
time out and return to the home screen while dimming the LCD.
2. Press the BACK button.
The Installer password screen appears as shown below.
Installer Password Screen
The first digit is enclosed in brackets when the Installer password screen
appears.
DigitalMedia Distribution Center: DM-MD6X4/DM-MD6X6 • 21
DigitalMedia Distribution Center