Hardware Hookup - Crestron DigitalMedia DM-MD6X4 Installation & Operation Manual

Crestron DM-MD6X4/DM-MD6X6
Stacking
Installation & Operation Guide – DOC. 7196B
Four "feet" are provided with the DM-MD6X4 and DM-MD6X6 so that if the unit is
not rack mounted, the rubber feet can provide stability when the unit is placed on a
flat surface or when it is stacked. These feet should be attached prior to the hookup
procedure. Refer to the following illustration for placement of the feet.
Foot Placement for the DM-MD6X4/DM-MD6X6
Place Feet in Corners
NOTE: No more than two DM-MD6X4 or DM-MD6X6 units should be stacked.

Hardware Hookup

Make the necessary connections as called out in the following illustrations. Refer to
"Network Wiring" on page 16. Apply power after all connections have been made.
Hardware Connections for the DM-MD6X4 (Front)
COMPUTER:
To computer
console
Hardware Connections for the DM-MD6X6 (Front)
COMPUTER:
To computer
console
DigitalMedia Distribution Center: DM-MD6X4/DM-MD6X6 • 19
DigitalMedia Distribution Center