TRAINING MANUAL
WM2801H*A
After removing the door gasket, you can
reach inside the cabinet and unplug the
electrical connector to the door switch.
If you are replacing the door switch, you
can do it without any disassembly other
than the door gasket. Remove the two
screws that hold the switch in place, pull it
out through the opening, and replace it.
Remove the two screws that secure the top
of the front cover. Be careful that the front
does not fall forward, causing injury or
damage.
Lift the front cover off the tabs at the
bottom of the machine.
Set it aside face down on a blanket or
protective surface.
CAUTION!
The door is very heavy because of the large
glass window.
Page 46
WM2801H*A
Washing Machine