LG WM2801H Series Training Manual page 21

TRAINING MANUAL
INSTALLATION
WM2801H*A
(Pedestal, new style, continued)
Insert the T-clip of the four retainers into
the washer base, as shown.
Press up on the back of the clip and pull
outward to lock it into place.
Set the washer on the pedestal.
(The washer feet fit into the outermost
holes in the mounting brackets.)
Make sure the screws on the pedestal align
with the holes in the retainers.
Attach two screws in each retainer to
attach the washer to the pedestal. Tighten
them without stripping them; the brackets
are plastic. If the screws are not tightened
correctly, noise and vibration will result.
Turn each leg on the washer ½ turn down
to put a little tension between the washer
and pedestal to eliminate vibration.
Push the washer and pedestal into their
place. Then level the washer by adjusting
the front leg(s). When it is level, lock down
the adjuster lock nuts.
Page 21
WM2801H*A
Washing Machine