TRAINING MANUAL
CONTROL PANEL
WM2801H*A
DISASSEMBLY/REPAIR
Remove the screws securing the top plate
(cover.)
Push the top plate (cover) backward a
couple of inches and then lift it off the
machine.
Disconnect the cables connecting the
washer and the display board.
Remove the dispenser drawer by pressing
the release tab and pulling it all the way
out.
Remove the two screws at the dispenser.
Remove the screw from the back of the
control panel on the side opposite the
dispenser.
Lift the top of the control panel and roll it
forward slightly to remove it from the
machine.
Remove the eight screws that secure the
display board to the control panel.
Page 42
WM2801H*A
Washing Machine