The Service Screen - ZyXEL Communications SBG5500-A User Manual

Table 59 Configuration > Firewall / Security > Scheduler Rule
LABEL
Remove
#
Rule Name
Days
Time
Description
9.7.1 Add/Edit a Scheduler Rule
Click Add in the Scheduler Rule screen, or select a rule and click Edit to open the following screen. Use
this screen to configure a restricted access schedule.
Figure 118 Scheduler Rule: Add/Edit
The following table describes the labels in this screen.
Table 60 Scheduler Rule: Add/Edit
LABEL
Rule Name
Description
Days
Time of Day Range
OK
Cancel

9.8 The Service Screen

You can configure customized services and port numbers in the Service screen. For a comprehensive list
of port numbers and services, visit the IANA (Internet Assigned Number Authority) website.
Click Configuration > Firewall / Security > Service to display the following screen.
Chapter 9 Firewall
DESCRIPTION
To remove an existing scheduler rule, select it and click Remove.
Note: You cannot delete a scheduler rule once it is applied to a certain feature.
This is the index number of the rule.
This is the name of the rule.
This shows the day(s) on which this rule is enabled. Green days show when the rule is enabled,
Gray days show when the rule is disabled.
This shows the period of time on which this rule is enabled.
This shows the description of this rule.
DESCRIPTION
Enter a name (up to 31 printable characters English keyboard characters, not including
spaces) for this schedule.
Enter a description for this scheduler rule.
Select the check boxes for the days that you want the SBG to perform this scheduler rule.
Enter the time period of each day, in 24-hour format, during which the rule will be
enforced.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
SBG5500 Series User's Guide
149