The Lan Setup Screen - ZyXEL Communications SBG5500-A User Manual

Table 20 Configuration > LAN / Home Network > LAN Status
LABEL
IP Address
MAC Address
ARP Table
Click this to view IP-to-MAC address mapping(s).
#
IP Address
MAC Address
Interface
Multicast Status
Click this to look at the current list of multicast groups the SBG has joined and which ports have joined it.
#
Type
Interface
Multicast Group
Host

6.3 The LAN Setup Screen

Use this screen to set the Local Area Network IP address and subnet mask of your SBG. Click
Configuration > LAN / Home Network to open the LAN Setup screen.
Figure 61 Configuration > LAN / Home Network > LAN Setup
The following table describes the labels in this screen.
Table 21 Configuration > LAN / Home Network > LAN Setup
LABEL
Edit
#
Group Name
Zone Name
IPv4 / Mask
Chapter 6 LAN
DESCRIPTION
This field displays the DHCP client's IP address.
This field displays the MAC address to which the IP address is currently assigned or for
which the IP address is reserved.
This is the ARP table entry number.
This is the learned IPv4 or IPv6 IP address of a device connected to a port.
This is the MAC address of the device with the listed IP address.
This is the interface used by the ARP entry.
This is the multicast status table entry number.
This is the protocol used by the interface.
This field displays the name of an interface on the SBG that belongs to an IGMP
multicast group.
This field displays the name of the IGMP multicast group to which the interface
belongs.
This shows the clients that are part of this multicast group.
DESCRIPTION
Select an entry and click Edit to modify it.
This field is a sequential value, and it is not associated with a specific entry.
This field shows the interface group name.
This field shows the security zone (LAN, WLAN, DMZ, or EXTRA) in which the LAN
interface is included.
This field displays the LAN IPv4 address assigned to your SBG and the subnet mask of
your network in dotted decimal notation.
SBG5500 Series User's Guide
88