ZyXEL Communications SBG5500-A User Manual page 245

Figure 173 Maintenance > Diagnostic > Packet Capture
The following table describes the labels in this screen.
Table 114 Maintenance > Diagnostic > Packet Capture
LABEL
Status
Interface
File Name
Setting
Chapter 20 Diagnostic
DESCRIPTION
This displays USB not found if there is no USB detected in the port.
This displays Ready when the USB is ready for capture.
This displays Unmount USB to confirm you can remove your USB drive safely.
This displays Capturing when the packet is in process of being captured.
This displays Completed when the packet capture process is finished.
Enabled interfaces appear under Interface. Select interfaces for which to capture
packets.
Enter the label that identifies the file. The file name format is interface name-file
suffix.pcap.
SBG5500 Series User's Guide
245