ZyXEL Communications SBG5500-A User Manual page 70

The following table describes the labels in this screen.
Table 14 Configuration > WAN / Internet > Mobile
LABEL DESCRIPTION
3G Connection Settings
Card This field displays the manufacturer and model name of your 3G/4G card if you inserted one in
Description the SBG. Otherwise, it displays N/A.
Username Type the user name (of up to 64 ASCII printable characters) given to you by your service
provider.
Password Type the password (of up to 64 ASCII printable characters) associated with the user name
above.
Authentication Select an authentication type protocol for outgoing connection requests. Select Auto for the
Type SBG to accept any protocol when requested by the remote node. Select CHAP to accept only
CHAP and PAP for the SBG to accept only PAP.
PIN A PIN (Personal Identification Number) code is a key to a 3G/4G card. Without the PIN code, you
cannot use the 3G card.
If your ISP enabled PIN code authentication, enter the 4-digit PIN code (0000 for example)
provided by your ISP. If you enter the PIN code incorrectly, the 3G/4G card may be blocked by
your ISP and you cannot use the account to access the Internet.
If your ISP disabled PIN code authentication, leave this field blank.
Dial string Enter the phone number (dial string) used to dial up a connection to your service provider's base
station. Your ISP should provide the phone number.
For example, *99# is the dial string to establish a GPRS or 3G or 4G connection in Taiwan.
APN Enter the APN (Access Point Name) provided by your service provider. Connections with
different APNs may provide different services (such as Internet access or MMS (Multi-Media
Messaging Service)) and charge method.
You can enter up to 32 ASCII printable characters. Spaces are allowed.
Connection Select Nailed UP if you do not want the connection to time out.
Select on Demand if you do not want the connection up all the time and specify an idle time-
out in the Max Idle Timeout field.
Max Idle This value specifies the time in minutes that elapses before the SBG automatically disconnects
Timeout from the ISP.
IP Address
Obtain an IP Select this option If your ISP did not assign you a fixed IP address.
Address
Automatically
Use the Select this option If the ISP assigned a fixed IP address.
following static
IP address
IP Address Enter your WAN IP address in this field if you selected Use the following static IP address.
Subnet Mask Enter the Subnet Mask provided by your ISP.
DNS
Obtain DNS info Select this to have the SBG get the DNS server addresses from the ISP automatically.
dynamically
Use the Select this to have the SBG use the DNS server addresses you configure manually.
following static
DNS IP address
DNS server 1 Enter the first DNS server address assigned by the ISP.
DNS server 2 Enter the second DNS server address assigned by the ISP.
Chapter 5 WAN/Internet
SBG5500 Series User's Guide
70