ZyXEL Communications SBG5500-A User Manual page 41

Figure 34 Wizard IPv6 Setup
Select the WAN interface on which you want to have an IPv6 connection. Select Auto Detection for the
6
SBG to automatically detect the IPv6 Internet connection type, and the Wizard IPv6 setup is completed.
If you want to enter a static IPv6 address or obtain it from a DHCP server click Next.
Figure 35 Interface Setup
If you did not select Auto Detection the following screen displays. Use this screen to enter a static IPv6
7
address assigned by your ISP, and/or obtain an IPv6 address from a DHCPv6 server. The IP address
assigned by a DHCP server has priority over the IP address automatically generated by the SBG.
Chapter 3 Wizard
SBG5500 Series User's Guide
41