Setting Mode (08) Codes - Oki MC770 Maintenance Manual

Setting Mode (08) Codes

Sub
05/08 Mode Element
element
08 Setting System User Card reading device
Mode interface
08 Setting System User Card reading device
Mode interface
45584901TH Rev.1
Sub-
Item Subitem Code
code
3500
3501
Default Acceptable
Details RAM
value value
Device setting 0006 0- SYS To enable the e-Bridge ID Gate, a card reading device
0001 4294967295
Card reader format 0 0- SYS To access the data in the noncontact IC card, the Key
information -1 4294967295
Oki Data CONFIDENTIAL
Contents
should be set in the order of "ABYYZZZZ". (Enter the
corresponding values to "A", "B", "YY" and "ZZZZ".)
- AB: Special setting
- A: Debugging NIC
0: Not used 1: Used
- B: Interface
0: USB connection 1: Serial connection (KP-2003 only)
- YY: Authentication
00: No authentication using card
02: FeliCa (KP-2003 only)
03: Mifare (KP-2005 only)
04: HID (KP-2004 only)
07: USB keyboard emulation authentication device
08: Q-tag
09: Magnetic card I/F
10: NFC (Common setting for Felica/Mifare)
11: NFC (Separate setting for Felica/Mifare)
12: NFC (Dedicated setting for Felica)
13: NFC (Dedicated setting for Mifare)
- ZZZZ: Sub-code (Specifies the usage type of card ID)
0000: No authentication using card
0001: IDm (Felica/NFC-Felica) and (or) UID (Mifare/NFC-
Mifare)
0002: Data (Felica/NFC-Felica/Mifare/NFC-Mifare)
0003: SSFC mode
Information "LLLL" and the Sector Number "MMMM"
should be set.
The "LLLL" should be set first, and then "MMMM".
KP-2003:
LLLL: System code (hexadecimal number)
MMMM: Service code (hexadecimal number)
KP-2005:
LLLL: Key information
MMMM: Sector number (hexadecimal number)
Proce-
dure
5
5
11-76 /