Oki MC770 Maintenance Manual page 282

(7) Turn the power OFF using the main power switch of the equipment, remove the
download jig, and then install the right side cover.
(8) In the FAX Clearing Mode, perform the "FAX Set Up".
• Confirm the destination setting is correct in the Setting Mode (08).
08-9000: Destination setting of the equipment
08-9001: Destination setting of the FAX machine
• Turn ON the power while [1] button and [*] button are pressed simultaneously.
• Key in "100".
• Press the [START] button.
Notes:
If the equipment does not work properly after the operation (8), follow the procedure
below and then perform the "Clearing the image data" in the FAX Clearing Mode to
erase the image data in the memory.
• Confirm the destination setting is correct in the Setting Mode (08).
08-9000: Destination setting of the equipment
08-9001: Destination setting of the FAX machine
• Turn ON the power while [1] button and [*] button are pressed simultaneously.
• Key in "102".
• Press the [START] button.
[B] Confirmation of the updated data
After the updating is completed, check each data version in Setting Mode (08) to confirm
that the data were overwritten properly.
 P. 8-28 "8.6 Confirmation of the updated data"
45584901TH Rev.1
Oki Data CONFIDENTIAL
8-27 /