Notices - Oki MC770 Maintenance Manual

10.3 Notices

10.3.1 Setting code
Each signal will be enabled by configuring the setting code "08-9016" (Counter installed
externally).
08-9016
0: No external counter (Default)
1: Coin controller
5: Coin controller supporting ACS
10.3.2 Setting value change and restrictions when using the coin controller
1. Setting value
- 08-9016 (Counter installed externally): Set to "1" (Coin controller). The coin controller
supporting ACS (Auto Color Selection) can be connected by setting to "5" (Coin controller
supporting ACS/ mixed-size). However, operation is not guaranteed unless the specification
for the ACS timing is met.
- 08-9017 (Setting for counter installed externally): It should be charged precisely according
to the usage.
Example: To charge only when copies are made, set to "1".
- 08-6011 (Definition setting of large sized paper):
- Setting value "0": Set this value to regard A3, LD, undefined, and custom size that
exceeds 415 mm as large size.
- Setting value "1": Set this value to regard A3, LD, undefined, B4, Folio, 14"LG, 13.5"LG,
13"LG, Computer and custom size that exceeds 325 mm as large size.
- Setting value "2": Set this value to regard B4 and custom size that exceeds 325 mm as
large size.
45584901TH Rev.1
Oki Data CONFIDENTIAL
10-5 /