Service Mode] Screen - Oki MC770 Maintenance Manual

[2] In the security mode
If the security mode (the value of 08-8911 is "3") is set, log into Service UI following the steps
below.
(1) Turn the power ON.
(2) Enter the user name and password on the USER AUTHENTICATION screen. The password
needs to be changed to log in for the first time.
Notes:
In case the password is forgotten, ask the administrator to reset the service password. In
case both the service password and administrator password are forgotten, the passwords
can be reset in the password reset mode. Note that the user data are deleted at that time.
(3) Press the [SETTING] button.
(4) Enter the password for Service UI on the SETTINGS screen. The SERVICE MODE screen
is displayed.
3.2.3

[SERVICE MODE] Screen

After selecting the mode and pressing the [NEXT] button, the screen is switched to the selected
mode.
3.2.4 Setting/Changing password
(1) Press the [SETTINGS] button on the SERVICE MODE screen to display the SETTINGS
screen.
(2) Press the [SERVICE PASSWORD] button to change the service password, or [RESET
ADMIN PASSWORD] to reset the administrator password.
45584901TH Rev.1
Fig. 3-4
Oki Data CONFIDENTIAL
3-6 /