Setting/Changing the Supervisor Password
Perform the following steps to set or change the Supervisor
password:
1. Turn On your notebook computer.
2. After Power On Self-Test (POST) successfully
completes, press [fn] + [F3] to access System Setup.
3. The System Setup main menu appears on the screen.
4. Highlight the Security Setup menu and press [Enter].
5. Highlight the Set Supervisor Password field and press
[Enter].
6. Type in up to an eight character Supervisor password
and press [Enter].
To confirm, type in your Supervisor password a second time
and press [Enter].
NOTE:
If a password already exists, you will be prompted to
enter the old password before a new one can be set.
7.
Select the Exit menu and choose Save to save your
new settings and exit System Setup.
When you access System Setup, you are prompted for the
Supervisor password.
System BIOS
3-15