Keyboard Hot Keys - DEC GTX5166M Service Quick Reference Manual

Keyboard Hot Keys

Hot keys are activated by holding down the [fn] key (located in
the lower left corner of the keyboard) and pressing the desired
function key.
Function
+
Places the computer in Standby Mode.
Sets the computer's operating mode to maximize
battery life. A single beep is emitted when the
computer switches to this operating mode. If you
Suspend/Resume or Reboot the system, the system
returns to the settings contained in the system BIOS.
Sets the computer's operating mode to maximize
performance. Two beeps are emitted when the
computer switches to this operating mode. If you
Suspend/Resume or Reboot the system, the system
returns to the settings contained in the system BIOS.
Used during Power Up Self-Test (POST) to enter the
System setup program.
Enables and disables the computers external display
port and the LCD display. There are three display
modes:
LCD Display
LCD Display and External Monitor (simulscan)
External Monitor only
Each time you press this hot key, the computer
changes to the next display setting. The display mode
for the External Monitor is shown on the LCD Status
display.
Overview
continued
1-21