DEC GTX5166M Service Quick Reference Manual page 114

8. Turn the system unit over so the bottom is up. Remove
the two rubber feet and seven screws (Figure 5-10).
Note: one screw is located in the battery compartment.
9. Turn the system unit over so the top is up and open the
LCD Display.
10. Remove the eight screws that hold the keyboard deck
and LCD and Audio cables in place (Figure 5-10). Note:
the LCD and Audio cables are secured to the top of the
DC-to-DC Converter.
11. Disconnect the two LCD cables from the Motherboard
and the Daughter card.
FRU Replacement
5-15