Reinstalling And Installing Drivers - DEC GTX5166M Service Quick Reference Manual

System Restoration

Reinstalling and Installing Drivers

Reinstalling Drivers – The procedures for reinstalling certain
drivers over an existing installation is different than installing the
drivers on a clean installation. For information on how to reinstall
drivers, refer to the latest version of the DIGITAL HiNote System
CD.
Installing Drivers – In order to restore the system back to its
original DIGITAL factory shipped configuration, you must install
the HiNote Ultra 2000 Series audio, video, track pad and
network drivers (the need to install the network driver depends
upon the individual requirements). If you have installed WinNT,
you will also want to install the EPM (Enhanced Power
Management) driver located in the Driver/WinNT directory.
Please refer to Chapter 5 of the User's Guide in the section
labeled Installing PC Cards in WinNT 4.0 , for information on
EPM features. These drivers are located on the DIGITAL
HiNote System CD. To install any of these drivers, please refer
to the following instructions:
1. Boot to Windows.
2. Insert the DIGITAL HiNote System CD into the CD-
ROM drive.
3. From the Taskbar, click on Start and then Run. In the
Run command box type X:\CDInstall (X represents the
drive letter of the CD-ROM).
4. At the Welcome screen, click on Next. Then at the
Install screen, click on Driver Installation Instructions.
5. Select the driver(s) you wish to install. A README.TXT
file will appear. Print the file(s). These are the
installation instructions to install the selected drivers(s).
2-2