System Restoration
5. At the list of options choose number 2 (exit to DOS).
Insert the Microsoft CD into the CD-ROM drive.
6. From the DOS prompt, type the letter that represents
the CD-ROM drive, then a colon and a backslash. For
example: D:\
7. Enter the command to start the operating system
installation:
Windows 95:
D:\win95\setup
Windows NT:
D:\winnt \bUse this command string if you do not want
to create an Emergency Backup Repair disk
(recommended). You must include a space between
the "winnt" and the "\b".
D:\winntUse this command if you want to create an
Emergency Backup Repair Disk as a part of the
installation.
8. Press <Enter> and follow the instructions that appear on
the screen to complete the installation.
9. Remove the Microsoft Operating System CD and insert
the DIGITAL HiNote System CD. Run CDInstall. Click
on the Next buttons until the Main Install screen
appears.
10. Click on Enhancements and Updates, and then click on
Next. Follow the on-screen instructions. These
enhancements update the Microsoft Operating system.
11. After re-installing the Operating System you should re-
install all drivers. Please refer to the "Installing Drivers"
of this chapter for information.
2-18