Table of Contents
Advertisement
12. Remove the four hinge screws at the back of the
Keyboard Deck (Figure 5-11).
13. Grasp behind the Touchpad and pull up on the
Keyboard Deck to release the UMI connector.
NOTE:
When reassembling the system, connect
the UMI cable to Daughter card before
replacing the Keyboard Deck.
Reconnect the two LCD cables.
Before replacing the Keyboard Deck
screws, attach the AC adapter and verify
that the system powers up.
Make a visual inspection of the connections
before replacing the screws.
14. Flip the PC Card ejectors out and lift the LCD Display
and Keyboard Deck up and away from the rest of the
system unit.
15. To separate the Keyboard Deck and LCD Display,
carefully maneuver each cable through its the opening
in the Keyboard Deck.
CAUTION
Be careful not to crease the cable when you fold it
over.
FRU Replacement
5-17
Advertisement
Table of Contents
