Table of Contents
Advertisement
Chapter 8 Wireless LAN
The following table describes the labels in this screen.
Table 18 Wireless LAN > MAC Filter > Add
LABEL
MAC
Address
Back
Apply
8.5 The More AP
This screen allows you to enable and configure multiple wireless networks on the
IAD.
Click Network > Wireless LAN > More AP. The following screen displays.
Figure 30 Network > Wireless LAN > More AP
The following table describes the labels in this screen.
Table 19 Network > Wireless LAN > More AP
LABEL
#
Active
SSID
Security
Modify
82
DESCRIPTION
Enter the MAC addresses of the wireless devices that are allowed or denied
access to the IAD in these address fields. Enter the MAC addresses in a
valid MAC address format, that is, six hexadecimal character pairs, for
example, 12:34:56:78:9a:bc.
Click this to return to the previous screen without saving changes.
Click this to save your changes and go back to the previous screen.
Screen
DESCRIPTION
This is the index number of each SSID profile.
Select the check box to activate an SSID profile.
An SSID profile is the set of parameters relating to one of the IAD's
BSSs. The SSID (Service Set IDentifier) identifies the Service Set with
which a wireless device is associated.
This field displays the name of the wireless profile on the network. When
a wireless client scans for an AP to associate with, this is the name that
is broadcast and seen in the wireless client utility.
This field indicates the security mode of the SSID profile.
Click the Edit icon to configure the SSID profile.
IAD User's Guide
Advertisement
Table of Contents
