Table of Contents
Advertisement
Chapter 1 Introduction
1.6 LEDs (Lights)
The following graphic displays the labels of the LEDs.
Figure 5 LEDs on the Top Panel
None of the LEDs are on if the IAD is not receiving power.
Table 1 LED Descriptions
LED
POWER
PON
ETHERNET
1~4
WPS/
WLAN
26
COLOR STATUS
DESCRIPTION
Green
On
The IAD is receiving power and ready for use.
Blinking
The IAD is self-testing.
Red
On
The IAD detected an error while self-testing, or there
is a device malfunction.
Off
The IAD is not receiving power.
Green
On
The IAD has established a PON line connection with
the
Off
The IAD has not established a PON connection with
the ISP
Blinking
The IAD is in the process of downloading firmware.
Red
On
The IAD PON link has failed or has generated errors.
Green
On
The IAD has an Ethernet connection with another
device (such as a computer) on the Local Area
Network (LAN) through this port.
Blinking
The IAD is sending/receiving data to /from the LAN
through this port.
Off
The IAD does not have an Ethernet connection with
the LAN through this port.
Green
On
The wireless network is activated and is operating in
IEEE 802.11b/g/n
Blinking
The IAD is communicating with other wireless clients.
Orange
Blinking
The IAD is setting up a WPS connection.
Off
The wireless network is not activated.
ISP.
or the fiber optic line is down.
mode.
IAD User's Guide
Advertisement
Table of Contents
