ZyXEL Communications P-3202HN-Ba User Manual page 44

Chapter 4 Status Screens
Table 4 Status Screen
LABEL
Firmware
Version
WAN
Information
IP Address
IP Subnet
Mask
Default
Gateway
MAC
Address
LAN
Information
IP Address
IP Subnet
Mask
DHCP
MAC
Address
WLAN
Information
SSID
Channel
Security
Security
Firewall
System Status
44
DESCRIPTION
This field displays the current version of the firmware inside the device.
It also shows the date the firmware version was created. Click this to go
to the screen where you can change it.
This field displays the current IP address of the IAD in the WAN. Click
this to go to the screen where you can change it.
This field displays the current subnet mask in the WAN.
This field displays the IP address of the default gateway, if applicable.
This is the MAC (Media Access Control) or Ethernet address unique to
your IAD. This MAC is used for VoIP connections made over the WAN
and is different from the LAN MAC.
This field displays the current IP address of the IAD in the LAN. Click
this to go to the screen where you can change it.
This field displays the current subnet mask in the LAN.
This field displays what DHCP services the IAD is providing to the LAN.
Choices are:
Server - The IAD is a DHCP server in the LAN. It assigns IP addresses
to other computers in the LAN.
Relay - The ZyXEL Device acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the
clients.
None - The IAD is not providing any DHCP services to the LAN.
Click this to go to the screen where you can change it.
This is the MAC (Media Access Control) or Ethernet address unique to
your IAD. This MAC is used for LAN connections and differs from the
WAN MAC.
This is the descriptive name used to identify the IAD in the wireless
LAN. Click this to go to the screen where you can change it.
This is the channel number used by the IAD now.
This displays the type of security mode the IAD is using in the wireless
LAN.
This displays whether or not the IAD's firewall is activated. Click this to
go to the screen where you can change it.
IAD User's Guide