Download
Share
Print this page
ZyXEL Communications P-2612HNU-Fx Quick Start Manual
  1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Wireless Access Point
  5. P-2612HNU-Fx Series
  6. Quick start manual
ZyXEL Communications P-2612HNU-Fx Quick Start Manual

ZyXEL Communications P-2612HNU-Fx Quick Start Manual

802.11n adsl2+ voip iad
Hide thumbs Also See for P-2612HNU-Fx:

Advertisement

Quick Links

Download this manual See also: User Manual
P-2612HNU-Fx
802.11n ADSL2+ VoIP IAD
Firmware V3.10
Edition 1, 9/2010
DEFAULT LOGIN DETAILS
IP Address
User Login
Administrator
Login
www.zyxel.com
http://192.168.1.1
User Name: user
Password: 1234
User Name: admin
Password: 1234
2010 ZyXEL Communications Corporation
C

Advertisement

loading

Related Manuals for ZyXEL Communications P-2612HNU-Fx

Summary of Contents for ZyXEL Communications P-2612HNU-Fx

  • Page 1 P-2612HNU-Fx 802.11n ADSL2+ VoIP IAD Firmware V3.10 Edition 1, 9/2010 DEFAULT LOGIN DETAILS IP Address http://192.168.1.1 User Login User Name: user Password: 1234 Administrator User Name: admin Login Password: 1234 2010 ZyXEL Communications Corporation www.zyxel.com...
  • Page 2 ENGLISH Device Panels POWER WLAN PHONE1,2 LEDS ETHERNET INTERNET WLAN LEDS BUTTON ETHERNET DSL/WAN ON/OFF PORT PORTS RESET PHONE POWER PORTS PORTS PORT...
  • Page 3 3G wireless adapter for a 3G connection. There are also two phone ports for making calls over the Internet (Voice over IP or VoIP). The P-2612HNU-Fx can also function as a print server. Requirements •...

  • Page 4: Hardware Connections

    Internet). • 3G account - if you want to access the Internet through a 3G network. The P-2612HNU-Fx uses this 3G connection as your WAN or a backup when the DSL/ Ethernet WAN connection fails.
  • Page 5 1. Do one of the following for your Internet connection: a. DSL: Use a telephone wire to connect this port to a telephone jack (or the DSL or MODEM jack on a splitter, if you have one). b. WAN: If you have a DSL router or modem already in your network or you want to use a cable modem, push the DSL/WAN switch to the WAN side and use an Ethernet cable to connect this...
  • Page 6 • The POWER light blinks during start-up and is green once the P-2612HNU-Fx is ready. • An ETHERNET light turns on if the corresponding ETHERNET port is properly connected. An Ethernet port’s light blinks when the P-2612HNU-Fx is sending or receiving data through it.

  • Page 7: Set Up A Wireless Network

    • The WLAN/WPS light stays green when the wireless LAN is ready. It blinks when the P-2612HNU-Fx is sending/receiving data through the wireless LAN. • The DSL light stays on if a physical DSL connection exists and blinks when attempting to synchronize DSL signal.
  • Page 8 Push Button Configuration on page to have your wireless devices join the P-2612HNU-Fx’s wireless network using the Windows wireless configuration tool. • PIN Configuration - create a secure wireless network by entering your wireless device’s PIN (Personal Identification Number) into the configuration screen of the P-2612HNU-Fx.
  • Page 9 You must use the same method on the P-2612HNU-Fx and the wireless client. Push Button Configuration 1. Place a WPS-enabled device that is installed in your system and supports the WPS Push Button method within range of the P-2612HNU-Fx. 2. Press the WLAN button on the P-2612HNU-Fx’s top panel for five seconds.
  • Page 10 PIN Configuration 1. Place a WPS-enabled device that is installed in your computer and supports the WPS PIN configuration method within range of the P-2612HNU-Fx. 2. Log into the P-2612HNU-Fx’s web configurator at http://192.168.1.1 (see The Web Configurator page for more details on this).
  • Page 11 6. Click Start or Apply in the other device’s utility screen within two minutes of clicking Register in the P-2612HNU-Fx web configurator screen. 7. The P-2612HNU-Fx and the other WPS-enabled device establish a secure connection. This can take up to two minutes.
  • Page 12 2612HNU-Fx. Set Up a Wireless Network Manually Configure wireless devices to use the same wireless settings as the P-2612HNU-Fx. If you didn’t configure the P-2612HNU-Fx’s wireless settings, use the wireless SSID (network name) and WPA-PSK encryption key on the P-2612HNU-Fx’s rear panel. The connection procedure is shown here using Windows XP as an example.
  • Page 13 2. Select the P-2612HNU-Fx’s SSID name and click Connect (A). The SSID “SecureWirelessNetwork” is given here as an example. 3. You are prompted to enter a password. Enter it and click Connect.

  • Page 14: Make Phone Calls

    4. You may have to wait several minutes while your computer connects to the wireless network. 5. You should now be securely connected wirelessly to the P-2612HNU-Fx. Congratulations! Your computer is now ready to connect to the Internet wirelessly through your P- 2612HNU-Fx.

  • Page 15: The Web Configurator

    3. For call forward service, contact your service provider to know if they support this feature. 4. To receive a call through the P-2612HNU-Fx, the other party must have your SIP number and a SIP account of their own.
  • Page 16 2. For administrator login, enter username admin and password 1234 (default). For user login, enter user as the username and 1234 as the password. Click Login.  If the login screen does not open, make sure you allow web browser pop-up windows, JavaScript and Java permissions.
  • Page 17 Viewing a Product’s Certifications 1. Go to www.zyxel.com. 2. Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3. Select the certification you wish to view from this page. This device has been designed for the WLAN 2.4 GHz and 5 GHz networks throughout the EC region and Switzerland, with restrictions in France.
  • Page 18 Declaration of Conformity...
  • Page 19 Green Product Declaration ENGLISH DEUTSCH Green Product Declaration Green Product Declaration RoHS Directive 2002/95/ RoHS Directive 2002/95/EC WEEE Directive 2002/96/EC WEEE Directive 2002/96/EC (WEEE: Waste Electrical and (WEEE: Waste Electrical and Electronic Equipment) Electronic Equipment) 2003/108/EC 2003/108/EC Declaration Signature: Unterschrift des Name/Title: Alan Cho / Erklärenden: Quality Assurance...
  • Page 20 ITALIANO NEDERLANDS Dichiarazione Green Product Productmilieuverklaring Direttiva RoHS 2002/95/CE RoHS-richtlijn 2002/95/EC Direttiva RAEE 2002/96/CE AEEA-richtlijn 2002/96/EC (RAEE: Rifiuti di Apparecchiature (AEEA: Afgedankte Elektrische Elettriche ed Elettroniche) en Elektronische Apparaten) 2003/108/CE 2003/108/EC Firma dichiarazione: Verklaringshandtekenin Nome/titolo: Alan Cho / Quality Assurance Director Naam/titel: Alan Cho / Data (aaaa/mm/gg): 2009/ Quality Assurance...