Garmin GTN 725 Pilot's Manual page 123

1. Touch the SAR Pattern key and select Parallel Track as the
2. Touch the Initial Track key to open the keypad. Use the keypad
3. Touch the Initial Turn Direction key to select between Left
4. Touch the Leg Length key to open the keypad. Use the keypad
5. Touch the Track Spacing key to open the keypad. Use the
6. Touch the Leg Count key to open the keypad. Use the keypad
7. Touch the Load Pattern key to load selected pattern to the
Or
8. Touch the Load Pattern & Activate key to load selected
190-01007-03 Rev. J
190-01007-03-Final.indb 21
pattern type.
and Enter to select the initial course.
or Right as the initial turn direction.
and Enter to select the length of the parallel track legs.
keypad and Enter to select the desired spacing between the
parallel track legs.
and Enter to select the desired number of parallel track legs.
active flight plan.
pattern to the active flight plan and go direct-to the initial
waypoint.
Garmin GTN 725/750 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
4-21
Index
7/9/2015 2:07:07 PM