System Setup Values - Garmin GTN 725 Pilot's Manual

Foreword
Getting
View System
Started
Status Values
and SW Versions
Audio &
Xpdr Ctrl
Set Alert Values
Com/Nav
FPL
Select Audio Settings
Direct-To
Proc
Charts
1.5.2.1

System Setup Values

Wpt Info 1. From the Home page, touch System and then Setup.
Map
Traffic
2. Select the desired Time Format and Local Offset by touching
Terrain
Weather
3. Touch the Com Channel Spacing key to toggle between
Nearest
4. For Nearest Airport filtering, touch the Runway Surface key
Services/
Music
Utilities
5. Touch the Minimum Runway Length key to select the
System
Messages
6. Touch the Crossfill key to enable or disable crossfill with a
Symbols
7. Select the CDI and ILS CDI Capture method with the Selected
Appendix
1-12
Index
190-01007-03-Final.indb 12
GPS Status Page & Information on
External LRUs
SBAS Providers
Select Backlight
Setting
Figure 1-19 System Page
the Time Format (12 Hour, 24 Hour, and/or UTC) keys and
selecting the appropriate Local Time Offset after touching the
Local Offset key.
8.33 and 25.0 kHz channel spacing.
and select the desired type of surface that will appear in the
Nearest Airport list.
minimum runway length allowed for the Nearest Airport.
Selecting 0 feet will show all airports regardless of runway
length.
second GTN unit.
CDI and ILS CDI Capture keys.
Garmin GTN 725/750 Pilot's Guide
Select System
Setup Values
Select User Fields
Set System Units
Of Measurement
Select Voice
Command Setup
Select Connext Setup
190-01007-03 Rev. J
7/9/2015 2:06:50 PM