Load Procedures - Garmin GTN 725 Pilot's Manual

4.2.1.5

Load Procedures

Foreword
The Load Procedure selection from the Waypoint Options will start the
Procedures function. See the Procedures section for complete information.
Getting
Started
1. On the Active Flight Plan page, touch the desired waypoint in
Audio &
Xpdr Ctrl
2. Touch the Load Procedures key to go to the Procedure
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
NOTE: In software version 5.13 and earlier, for some procedures, due to
Terrain
very small position differences in the database, consecutive flight plan legs
do not match up. The total effect on navigational guidance is negligible.
The LOC BC 13 at KSLE via UBG shown below is an example of this.
Weather
Nearest
Services/
Music
Procedure Flight Plan
Utilities
Leg Discrepancy
System
Messages
Symbols
Appendix
Figure 4-15 Procedure Flight Plan Leg Position Difference
4-10
Index
190-01007-03-Final.indb 10
the flight plan. The Waypoint Options list will be displayed.
function for adding procedures to the selected flight plan.
Figure 4-14 Load Procedures Wpt Option
Garmin GTN 725/750 Pilot's Guide
Touch to Select a Departure
Touch to Select an Arrival
Touch to Select an Approach
190-01007-03 Rev. J
7/9/2015 2:07:05 PM