Store Flight Plan; Invert Flight Plan - Garmin GTN 725 Pilot's Manual

Hide thumbs Also See for GTN 725:
Table of Contents

Advertisement

4.3.1

Store Flight Plan

Foreword
A flight plan must be saved to the Catalog to be used in future flights. The
Store Flight Plan function will save the Active Flight Plan to the Catalog.
Getting
Started
NOTE: If a flight plan that includes a procedure that has been modified
Audio &
by the pilot is saved into the flight plan catalog, the GTN cannot check the
Xpdr Ctrl
accuracy of that procedure when that flight plan is used on a later flight. It
is recommended that flight plans with modified procedures not be saved
Com/Nav
in the flight plan catalog.
FPL
1. While viewing the Active Flight Plan page, touch the Menu
Direct-To
2. Touch the Store key to store the current Active Flight Plan into
Proc
Charts
3. When a duplicate flight plan is created, a warning dialog will
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Original Flight Plan
Music
Utilities
Duplicate Flight Plan
System
4.3.2

Invert Flight Plan

The Invert Flight Plan option allows you to reverse the Active flight plan and
Messages
use it for navigation guidance back to your original departure point. The original
flight plan stored in the catalog is not affected.
Symbols
1. While viewing the Active Flight Plan page, touch the Menu
Appendix
4-26
Index
190-01007-03-Final.indb 26
key. The Flight Plan Menu will be displayed.
the Catalog. The flight plan will be named by the beginning
and ending waypoints.
appear and the flight plan will be saved with a numeral at the
end of the destination waypoint.
Figure 4-37 Duplicate Flight Plan Naming
key. The Flight Plan Menu will be displayed.
Garmin GTN 725/750 Pilot's Guide
Duplicate Flight Plan
190-01007-03 Rev. J
7/9/2015 2:07:08 PM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gtn 750

Table of Contents