A-5 Sysmac Error Status Codes - Omron 3G3AX-MX2-ECT User Manual

Appendices
A-5 Sysmac Error Status Codes
A list and descriptions of the error event codes that display in Sysmac Studio are provided.
A-5-1 Error Table
The errors that may occur for this Unit are listed below. Event levels are given in the table as follows:
Abbreviation
Maj
Prt
Min
Obs
Info
Event code Event name
04A10000 hex Non-volatile
Memory
Hardware
Error
04BA0000 hex Connection
Error
between
Inverter and
Communica-
tions Unit
04BB0000 hex Inverter
Warning
04BC0000 hex Inverter Trip
34F00000 hex PDO Setting
Error
A-36
Name
Major fault level
Partial fault level
Minor fault level
Observation
Information
Meaning
An error occurred in • Non-volatile memory failure
non-volatile mem-
ory.
An error occurred in • Contact failure between the
the connection Inverter and the EtherCAT
between the Communications Unit for the
Inverter and the Inverter.
EtherCAT Commu-
• Inverter trip was reset.
nications Unit for
• The Inverter was initialized or
the Inverter.
the mode was changed.
• The EtherCAT Communications
Unit for the Inverter failed.
An Inverter warn- • An Inverter warning was
ing was detected. detected.
An Inverter trip was • An Inverter trip was detected.
detected.
There is an illegal • The PDO mapping or Sync-
setting value in the Manager settings are incorrect.
PDO mapping.
Assumed cause
Maj
EtherCAT Communication Unit USER'S MANUAL (3G3AX-MX2-ECT)
Level
Reference
Prt Min Obs Info




