Terminal Setup - Planet ISW-1022MT Quick Installation Manual

4. Terminal Setup

To configure the system, connect a serial cable to a COM port on a PC or notebook
computer and to RJ-45 type serial (console) port of the Managed Industrial Switch.
The console port of the Managed Industrial Switch is DCE already, so that you can
connect the console port directly through PC without the need of Null Modem.
ISW Industrial Managed Switch
RJ-45 Type Serial Port
9600,8,n,1
A terminal program is required to make the software connection to the ISW
Managed Industrial Switch. Windows' Hyper Terminal program may be a good
choice. The Hyper Terminal can be accessed from the Start menu.
1. Click START, then Programs, Accessories and then Hyper Terminal.
2. When the following screen appears, make sure that the COM port should be
configured as:
Baud: 9600
ø
Parity: None
ø
Data bits: 8
ø
Stop bits: 1
ø
Flow Control: None
ø

Terminal emulation software
RJ-45 to DB9 Rs-232
Cable
PC / Workstation
with
Serial Port