Vertical Position - Printek FormsPro 4300 Owner's Manual

Vertical Position

Line Feed
(or)
(or)
Causes the current line to be printed, and then advances the paper one line at the
current line spacing. If "Auto CR: On" is selected in the "Setup: INTERFACE"
menu, a carriage return will also be performed.
Control code:
Hexadecimal:
Control code:
Hexadecimal:
Escape Sequence:
Hexadecimal:
Absolute Vertical Tab
Sets the current line to line n of the current form. The actual position will depend on
the current line spacing.
Example: The following escape sequence will set the active line to line 12.
Escape Sequence:
Hexadecimal:
Relative Vertical Tab
Advances the active line by n lines. The actual distance moved will depend on the
current line spacing. Equivalent to sending n line feeds (LF).
Example: The following escape sequence will advance the active line by 12 lines. If
current line spacing is 6 lpi, this will cause the paper to advance one inch.
Escape Sequence:
Hexadecimal:
LF
0A
IND
84
ESC D
1B 44
ESC [ 1 2
1B 5B 31 32
ESC [ 1 2
1B 5B 31 32
DEC LA120 Emulation
d
64
e
65
LF
IND
ESC D
ESC [ n d
ESC [ n e
Page 5-9