Select Condensed Mode
(or)
Selects condensed mode. The resulting character spacing will be 17.14 cpi if 10 cpi
was selected, or 20 cpi if 12 cpi was selected.
Control code:
Hexadecimal:
Escape Sequence:
Hexadecimal:
Select Double-Wide Mode (one line)
(or)
Selects double-wide mode for one line. Double-wide mode doubles the width of all
characters, but does not affect character height. This mode is cancelled by a carriage
return or DC4.
Control code:
Hexadecimal:
Escape Sequence:
Hexadecimal:
Cancel Double-Wide Mode (one line)
Cancels double-wide mode selected by SO or ESC SO. Does not cancel double-wide
mode selected by ESC W or ESC !.
Control code:
Hexadecimal:
Double-Wide Mode
Selects double-wide mode for n=1, or cancels for n=0. Double-wide mode doubles
the width of all characters, but does not affect character height.
Example: The following escape sequence will select double-wide mode.
Escape Sequence:
Hexadecimal:
SI
0F
ESC SI
1B
0F
SO
0E
ESC SO
1B
0E
DC4
14
ESC W
1
1B
57
31
IBM Proprinter Emulation
ESC SI
ESC SO
ESC W n
Page 4-5
SI
SO
DC4