Reset Printer Configuration To Factory Defaults (Safe Mode); Media; Standard Media; Black Mark Media Position - Printek VehiclePro 420 Operator's Manual

Table of Contents

G. Reset Printer Configuration to Factory Defaults (Safe Mode)

Printer settings can be restored to factory configurations.

Note that WIFI network configurations will be lost when Network Config to Factory Defaults is checked.

A. Standard Media

Printek offers a variety of media types. You may visit our website, or contact your PrintekMobile

sales representative for a complete and up to date description of our consumables and

accessory products.

B. Black Mark Media Position

For automatic ticket printing, the black mark should be positioned as shown in the figure below.

The black mark MUST be on the front of the paper. When using Mark Sensing mode,

VehiclePro printers will automatically position the output for tear-off and printing following a

Form Feed command or by pressing the Paper Feed button.

For non-automatic paper positioning, refer to the FP-541 Integrator's Manual for sensing and

positioning commands.

www.printek.com

| P: 800.368.4636 | F: 269.925.8539 | E:

info@printek.com

Table of Contents

Show Quick Links

Table of Contents