Printer Controls - Printek FormsPro 4300 Owner's Manual

DEC LA120 Emulation

Printer Controls

Bell
Causes the printer's bell to sound.
Control code:
Hexadecimal:
Select Automatic Carriage Return
Selects automatic carriage return mode. This causes the printer to automatically
perform a carriage return (CR) for each line feed (LF), vertical tab (VT), or form feed
(FF) that it receives. Overrides the "Auto CR:" value in the "Setup: INTERFACE"
menu.
Escape Sequence:
Hexadecimal:
Cancel Automatic Carriage Return
Cancels automatic carriage return mode. Overrides the "Auto CR:" value in the
"Setup: INTERFACE" menu.
Escape Sequence:
Hexadecimal:
Printer Identification
(or)
Causes the printer to respond with ESC [ ? 2 c to identify itself as an LA120-RA
printer. (The response can only be sent if serial I/O is selected.)
Page 5-18
BEL
07
ESC [ 2 0
1B 5B 32 30
ESC [ 2 0
1B 5B 32 30
h
68
l
6C
BEL
ESC [ 20 h
ESC [ 20 l
ESC [ c
ESC [ 0 c