Vertical Tabs - Printek FormsPro 4300 Owner's Manual

DEC LA120 Emulation

Vertical Tabs

Vertical tab stops are associated with lines, not absolute physical positions. Changing
line spacing will change the physical position of the tab stops.
Vertical Tab
Causes the current line to be printed, and then advances the paper to the next vertical
tab stop. If no vertical tab stops are set, then a line feed is done instead. If "Auto CR:
On" is selected in the "Setup: INTERFACE" menu, a carriage return will also be
performed.
Control code:
Hexadecimal:
Set Vertical Tab Stop
(or)
(or)
Sets a vertical tab stop at the current line. The tab stop is associated with the active
line, not an absolute physical position.
physical position of the tab stop.
The tab stop set by this escape sequence will be added to previously set tab stops. If
this is not desired, the old tab stops should first be cleared.
Control code:
Hexadecimal:
Escape Sequence:
Hexadecimal:
Escape Sequence:
Hexadecimal:
Set Vertical Tab Stops
Sets new vertical tab stops at line n1, n2, n3, etc. 1 n 255. The tab stops are
associated with lines, not absolute physical positions. Changing line spacing will
change the physical position of the tab stops. The first line is line one.
The tab stops set by this escape sequence will be added to previously set tab stops. If
this is not desired, the old tab stops should first be cleared.
Page 5-14
VT
0B
Changing line spacing will change the
VTS
8A
ESC J
1B 4A
ESC 3
1B 33
VT
VTS
ESC J
ESC 3
ESC [ n1 ; n2 ; ... nx v