Directed Electronics Viper 7652V Owner's Manual page 47

to the vehicle or glass.
Trigger or Triggered Sequence: This is what happens when the
alarm " goes off " or " trips." The triggered sequence of your
system consists of the siren sounding and parking lights flashing for the
programmed duration.
Valet Button: A small push button switch located on your systems control
center. It is used to override the
starter interrupt when a 2-way remote is lost or damaged, or to
enter or exit Valet Mode.
Warn Away® Response: Light impacts to the vehicle generate the
Warn Away® Response, which consists of several seconds of horn
honks and flashing parking lights.
Zone: A zone is a separate input that the alarm can recognize as
unique. Each input to the system is connected to a particular zone.
Often, two or more inputs may share the same zone.
© 2008 Directed Electronics. All rights reserved. 47