Transmitter Configuration - Directed Electronics Viper 7652V Owner's Manual

➤ Transmitter configuration

A U X
Direct
Level
x 1
Access
Button
ARM/LOCK SILENT ARM
(Panic)
DISARM/UNLOCK SILENT DISARM VALET ON/OFF
(Panic)
STARTER RESET RUNTIME
ON/OFF
A U X
TRUNK RELEASE AUX 1
A A U X A U U X X
(Red/White)
A U X
Advance Level REQUEST TEM-
Change Car (3s) PERATURE *
Enter program-
ming (8s) *
button must be pressed and held to access state.
*
Button
Command: Press one time to Arm
Feedback: Lock Icon will appear, and one beep from remote
Arm
Press/hold for 1.5 seconds to Arm the system and then acti-
Notes:
vate the Panic output
Command: Press one time to Arm
Feedback: Unlock icon appears and remote beeps twice
Dis
arm Notes:
X
A U
Command: Press one time to activate Remote Start
Feedback: Remote Start Icon appears on screen. remote emits a tone
X
A U
Remote
Notes:
Start
X
A U
© 2008 Directed Electronics. All rights reserved.
A U X A U X A U X
x 2 x 3 x 4
SENSOR SILENT ALARM SILENT ALARM
BYPASS SENSORS ALL ZONES
CAR FINDER
TIMER MODE SMART START DEFOGGER ON
ON/OFF ON/OFF
AUX 2 AUX 3
RUNTIME EVENT HISTORY
REMAINING * REPORT *
13