Disarming The System - Directed Electronics Viper 7652V Owner's Manual

Security and remote start
Table of Contents

Advertisement

➤ Disarming the System

While the system is armed normally:
Press the
button once.
The siren in the
vehicle will " chirp" twice, and the parking lights
AUX
will
flash. The 2-way remote will " chirp"
the will blink.
If you hear four chirps on disarming, the system was triggered in your
absence. Immediately look at the Status LED in the vehicle and count the
number of flashes between pauses. This number is important, it tells what
triggered your alarm. See Disarming section under Diagnostics on page 34 for
more details.
If you hear five chirps on disarming, the system was repeatedly
triggered in your absence. Immediately look at the Status LED in the vehicle
and count the number of flashes between pauses. This number is important, it
tells what triggered your alarm.
The door locks (if connected) will unlock, and the parking lights will
flash.
While the alarm is triggering:
Press the
button on the remote. The siren will stop sounding and
disarm the a
larm system.
AUX
High-Security Disarming
If you want the Full Alarm response to stop without unlocking the doors,
press the
button. The system will re-arm and the current alarm re-
AUX
sponse will reset.
➤ System override
28
LED indicator
twice and
AUX
© 2008 Directed Electronics. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viper 7652xViper 7652p

Table of Contents