Table of Contents
Advertisement
User guide
CANMAX400 Standalone
Transmitter configuration
The following table provide
Button
Arm
Lock
Disarm
Unlock
Remote start
Remote start
Tr
Auxiliary
Function shift
Function
The
button must be pressed and held to access state.
List of commands and confirm
The following table lists the commands performed by each remote button:
Button
Command
Press once to arm
Arm
Press once to disarm.
Disarm
Press once to active
remote start
Remote start
Press and hold
seconds to activ
AUX
trunk release.
Press
one to three
times, and then press
Function shift
Pressing more than one button simultaneously generates an Error tone and the F-Shift LED turns ON.
© 2009 Directed Electronics, Inc. All rights reserved.
s a summa
ry of functi
on levels linked to the remote
x 0
unk release
AUX 1
ations
Confirmation
(2-way remote only)
.
Lock LED blink for one second with
1 beep and siren tone.
Lock LED blink for one second with
2 beeps.
Remote start LED blinks for 3
secon ds, remote start tones.
for 1.5
The AUX LED comes on for 3
ate the
seconds, and AUX activation tone
sounds.
LED indicators turn on (accordi
the feature command.)
.
control button:
x 1
x 2
AUX 2
ng to
Revision: 16-Nov-09
x 3
AUX 3
Notes
Press/hold for 1.5 seconds to Arm
the system and then activate the
Panic output.
This is an optional feature. See your
sales rep/installer for details.
Each press and release shifts the
function of the command button.
6
Advertisement
Table of Contents
