Siemens Albatros2 Technical Manual page 59

Prerequisites
Siemens
Building Technologies
Reset interactive errors
An interactive error exists on the plant.
l
The Info pages ( ) are selected. The title of the first error page is preselected.
l
Proceed as follows to reset an interactive error:
1. Turn the control knob to preselect "Reset".
2. Press the control knob.
The text changes to "Confirm" and is displayed inverted.
3. Press the control knob to initiate reset on the controller.
During the reset, the text changes to "Activated" and is preselected.
4. The page is automatically closed if the error is reset.
The device address ("Segment.Device") is not displayed on a directly connected
controller.
Graphical User Interface UI400
Evaluate plant and set
Evaluate and operate Info pages
6
59
CE1U2348en
2014-06-03